MIDI Common Controller List
| GM | GM2 | AWE32/ Live! |
GS (SC55) |
GS (SC88Pro) |
XG (SW1000) |
Controller | Controller Name | Controller Usage |
|---|---|---|---|---|---|---|---|---|
| x | o | o | o | o | o | 0 | Bank Select MSB | Select 0 - 127 |
| o | o | o | o | o | o | 1 | Modulation | Select 0 - 127 |
| x | x | x | x | x | x | 2 | Breath Control | Select 0 - 127 |
| x | x | x | x | x | x | 4 | Foot Control | Select 0 - 127 |
| x | o | x | o | o | o | 5 | Portamento Time | Select 0 - 127 |
| o | o | o | o | o | o | 6 | Data Entry MSB | Select 0 - 127 |
| o | o | o | o | o | o | 7 | Volume | Select 0 - 127 |
| o | o | o | o | o | o | 10 | Panpot (Stereo) | Select 0 - 127 |
| o | o | o | o | o | o | 11 | Expression | Select 0 - 127 |
| x | o | o | o | o | o | 32 | Bank Select LSB | Select 0 - 127 |
| o | o | o | o | o | o | 38 | Data Entry LSB | Select 0 - 127 |
| o | o | o | o | o | o | 64 | Damper Pedal | Entry < 64 = Off Entry > 64 = On |
| x | o | x | o | o | o | 65 | Portamento | Entry < 64 = Off Entry > 64 = On |
| x | o | x | o | o | o | 66 | Sustenuto Pedal | Entry < 64 = Off Entry > 64 = On |
| x | o | x | x | o | o | 67 | Soft Pedal | Entry < 64 = Off Entry > 64 = On |
| x | o | x | x | x | o | 71 | Filter Cutoff | Select 0 - 127 |
| x | o | x | x | x | o | 72 | Release Time | Select 0 - 127 |
| x | o | x | x | x | o | 73 | Attack Time | Select 0 - 127 |
| x | o | x | x | x | o | 74 | Filter Resonance | Select 0 - 127 |
| x | o | x | x | x | x | 75 | Decay Time | Select 0 - 127 |
| x | o | x | x | x | x | 76 | Vibrato Depth | Select 0 - 127 |
| x | o | x | x | x | x | 77 | Vibrato Rate | Select 0 - 127 |
| x | o | x | x | x | x | 78 | Vibrato Delay | Select 0 - 127 |
| x | x | x | o | o | o | 84 | Portamento Control | Any Value |
| x | o | o | o | o | o | 91 | Reverb [Effect 1] Send Level | Select 0 - 127 |
| x | o | o | o | o | o | 93 | Chorus [Effect 3] Send Level | Select 0 - 127 |
| x | x | x | x | o | o | 94 | Delay/Variation [Effect 4] Send Level | Select 0 - 127 |
| o | o | o | o | o | o | 96 | Data Increment (+1) | Any Value |
| o | o | o | o | o | o | 97 | Data Decrement (-1) | Any Value |
| x | x | o | o | o | o | 98 | NRPN LSB | Select 0 - 127 |
| x | x | o | o | o | o | 99 | NRPN MSB | Select 0 - 127 |
| o | o | o | o | o | o | 100 | RPN LSB | Select 0 - 127 |
| o | o | o | o | o | o | 101 | RPN MSB | Select 0 - 127 |
| x | o | o | o | o | o | 120 | All Sounds Off | Any Value |
| o | o | o | o | o | o | 121 | Reset All Controllers | Any Value |
| x | x | x | x | x | x | 122 | Local Control On/Off | 0 = Off, 127 = On |
| o | o | o | o | o | o | 123 | All Notes Off | Any Value |
| x | x | x | o | o | o | 124 | Omni Mode Off + All Notes Off |
Any Value |
| x | x | x | o | o | o | 125 | Omni Mode On + All Notes Off |
Any Value |
| x | x | x | o | o | o | 126 | Poly Mode On/Off + All Sounds Off |
Any Value |
| x | x | x | o | o | o | 127 | Poly Mode On + All Sounds Off |
Any Value |
| Key: | o = Received |
| x = Not Received |
| RPN | MSB | LSB | Data Entry |
|---|---|---|---|
| Pitch Bend Range | 0 | 0 |
Controller #6 sets the number of semitones that are bent in each direction at the maximum pitch bend value: 2 is the default value. The maximum value is 24 for most cards, providing a pitch bend range of two octaves. |
| Overall Fine Tuning | 1 | 0 |
Values range from -8191 to +8191 (using CC#6 and CC#38) with Controller #6 set to 64 for the default center value of 0. |
| Overall Coarse Tuning | 2 | 0 |
As with bend range, the range of acceptable values is 0 through 24 semitones, a 2 octave coarse tuning range. The range is centered around a default of 64, so that the CC#6 values go from 40 to 88, with 64 right in the middle. |
| RPN Null | 127 | 127 |
No data entry controller needs to follow this RPN, and any data entry messages sent after RPN Null will be ignored until a new RPN is specified. Settings already made do not change. |
| Note: Please check the MIDI implementation chart
for your synthesizer or soundcard for more information. Note: Roland SC-8820 and SC-8850 GS synths can also receive all GM2 messages when reset to GM2 mode. |